top of page

Drilling Consumables 

Rotary Percussion Drilling

There are two kinds of rotary percussion drilling methods.


1) Top Hammer and

2) Down-the-hole hammer.


Down the Hole Hammer and Bits

A down-hole hammer is a percussion hammer drill.  In this type of drilling the hammer and the bit are located at the end of the drill string.  As the name implies, this hammer works "down the hole".


One of the main advantages of the DTH hammer is that the drilling rate is not affected very much by the length or depth of the hole as the percussive action takes place on the bit by the piston located within the hammer. DTH Hammers are well suited for drilling into medium-hard to hard rock. They are especially well suited for drilling into fractured rock. They are extensively used in mining, quarrying, civil engineering, and water well drilling industries.


Please click on the link below to view the list of premium quality DTH Hammers offered by SRT. Our DTH hammers have been classified based on the dimensions of the hole they are suitable to drill and the bit shank they can accommodate. 

Please click on the link to view the list of DTH Hammers available with SRT


SRT also offers premium quality DTH Bits.
Please click to view the DTH bit selection criteria.


SRT offers the following DTH Bits, they have been segregated as per different shanks.

Please click on the links below to view the different sizes that can be made available by Scan Rock Traders.

Our Products


U 10/ 35 Durham Street,
St. Lucia-4067, Queensland, Australia.


07 3705 9644



  • LinkedIn
bottom of page